1. Products
  2. Bricklaying Tools
  3. Pointing & Grouting
Website Diamond Way
Sort By: Name (A-Z)

Pointing & Grouting

Pointing & Grouting

DTA Grouting Gun
$ 85.00 85.0 AUD
DTA Grouting Gun Nozzles Packet (5pcs)
$ 10.00 10.0 AUD
Metabo Cordless SB18LT Drill
$ 255.00 255.0 AUD
OX Pro Open Tool Tote
$ 149.00 149.0 AUD
Quikpoint Lightning Grouter Drill Mate
$ 659.00 659.0 AUD
Quikpoint Mortar Gun with Universal Drill Clamp
$ 510.00 510.0 AUD
Spear & Jackson Pointing and Grouting Gun (10mm Nozzle)
$ 62.00 62.0 AUD

Check out our range of pointing and grouting tools online and in-store at Diamond Way! We offer repointing & grouting guns, grouting gun spare parts, and tool bags from trusted brands like Quickpoint, DTA, and Spear & Jackson. Find everything you need for efficient and precise masonry work.


Category FAQS


 How do I prepare my pointing and grouting gun for use?

  • Trigger Release: Start by pressing the trigger-release lever and pulling the plunger arm back until the plunger exits the tube.
  • Tube Removal and Nozzle Attachment: Detach the tube from the frame and affix the required nozzle, ensuring it fits securely. Trim the nozzle to the correct size if needed.
  • Filling the Tube: Load the tube with the material you intend to use.
  • Tube Insertion: Reinsert the filled tube into the applicator frame, nozzle first.
  • Plunger Alignment: Line up the tube end with the plunger. Holding the trigger-release lever, advance the plunger into the tube.
  • Trigger Engagement: Release the trigger-release lever and squeeze the trigger until the plunger contacts the material inside the tube.


How do I use the gun for pointing and grouting tasks?

  • Nozzle Alignment: Position the nozzle against the area you wish to fill.
  • Material Application: Squeeze the trigger to exert pressure on the material inside the barrel, pushing it out through the nozzle.
  • Flow Stoppage: To halt the material flow, press the trigger release lever after applying the necessary amount of mortar.
  • Material Movement: For brickwork, ensure the material flows smoothly from the nozzle without requiring excessive pressure. Use a brick jointer to smooth and refine the mortar lines.
  • Excess Removal: After application, use a soft brush to clean away any surplus mortar.

Are there any specific tips for ensuring effective use of the pointing and grouting gun?

  • Ensure the nozzle size is appropriate for the task to facilitate smooth material flow.
  • Maintain consistent pressure on the trigger for even application.
  • Regularly clean the gun to prevent clogging and ensure longevity."